|
Forums39
Topics39,564
Posts320,870
Members26,686
| |
Most Online4,031
Dec 15th, 2024
|
|
|
Posts: 7,378
Joined: November 2002
|
|
|
31 members (Zanshin, Kennys, alecu7, SXMBND, JandIrene, xrayman67, SXMScubaman, BillDauterive, knitsoftwear, CLIFFTOPS, CaribbeanCanadians, mark37, Whale Tail, Todd, Don_and_Linda, Alltech63, eightzerobits, SXMbeacher, RickinAtlanta, RonDon, pedalpusher, JeanneB, jrw, MrEZgoin, bailau, bostonbob, cabokid, 4 invisible),
1,476
guests, and
93
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
#24155
12/21/2013 10:00 PM
|
Joined: Dec 2013
Posts: 329
Traveler
|
OP
Traveler
Joined: Dec 2013
Posts: 329 |
Hi Folks,
My wife and I recently completed a charter with the Moorings at St. Martin. Of course, with just the two of us, it fell to my wife to be up on the bow to pick up the mooring. She did fine but while anchored, we saw a cat come in and turn in front of the mooring and then back up to it. The captain then just stepped down to the swim platform and hooked up with what looked like very little effort.
I'm not sure if he then walked the line forward or if it was just a long line already attached to the bow.
Anyway, that looked like a pretty good idea and I just wondered if anyone else did it that way and what are the pros and cons.
Thanks,
Tom
|
|
|
 .
|
|
|
|
Joined: Sep 2002
Posts: 4,036
Traveler
|
|
Traveler
Joined: Sep 2002
Posts: 4,036 |
It works well on a cat because of the twin motors. Not quite so easy on a mono. Big advantage is how easy it is to pick up the ball. Big disadvantage is how close your prop is to lines that might get caught in it.
|
|
|
|
|
Joined: Jan 2007
Posts: 1,277
Traveler
|
|
Traveler
Joined: Jan 2007
Posts: 1,277 |
It can be done and made to look easy with good boat handling skills but there is no room for error. On a cat with sail drives if you miss or over run your approach you will put the painter in the prop. Picking it up from the bow you have 40 feet of boat between the line and the prop.
Jay
|
|
|
|
|
Joined: Dec 2005
Posts: 10,213
Traveler
|
|
Traveler
Joined: Dec 2005
Posts: 10,213 |
several years ago I saw Mike Kneafsey pick up a ball single handed mid ship, starboard side, nice pick up.
|
|
|
|
|
Joined: Sep 2002
Posts: 4,036
Traveler
|
|
Traveler
Joined: Sep 2002
Posts: 4,036 |
I never actually pick up at the stern as I have an excellent first mate who never misses the ball.
On my own, I drop the anchor, cos I don't like paying!
|
|
|
|
|
Joined: Sep 2010
Posts: 5,720
Traveler
|
|
Traveler
Joined: Sep 2010
Posts: 5,720 |
We had to do this one trip when we realized the boat hook we had was broken. Easy in a Cat - I'd only do it if necessary on a mono since it would be much easier to get the prop wrapped.
Matt
|
|
|
|
|
Joined: Feb 2002
Posts: 925
Traveler
|
|
Traveler
Joined: Feb 2002
Posts: 925 |
sail2wind said:
several years ago I saw Mike Kneafsey pick up a ball single handed mid ship, starboard side, nice pick up. Evan it’s not that hard with a mono. Had to do it when our designated picker upper dude couldn’t get out of his bunk because he was in de-tox from the night before. This was in the Grenadines where you don’t pick up a pennant you pick up the ball. Rig a long line from the bow cleat – pull up next to the ball slooooooowly - slip it in to the eye and casually walk to the bow and cleat that end. Take a bow. If it doesn’t go that way swear a lot and go to a different location and repeat. <img src="http://www.traveltalkonline.com/forums/images/graemlins/Banana.gif" alt="" />
|
|
|
|
|
Joined: Dec 2013
Posts: 329
Traveler
|
|
OP
Traveler
Joined: Dec 2013
Posts: 329 |
Thanks for the replies. I'm a little surprised that there are so many warnings about getting the mooring lines wrapped in the prop.
Obviously, I haven't done this before and, in fact, I have virtually no experience backing a large monohull. I understand that the boat doesn't steer very well in reverse but it seems like, if I'm backing slowly towards the ball, I'd have very little chance of overrunning it and getting things in the prop. Even if I really overcook it and back into the ball too fast, I just take it out of gear and wait until I drift back off of it right?
The big risk that I was expecting was if I had the the bow line led back along say, the starboard side and I back up to the ball and tie onto it, but the boat turns such the ball is on the port side. Is there a chance I could get hung up and not be able to "unwind"? It seems like it would blow around but maybe it could get stuck?
I really want to try this but I want to get as many tips as possible before I do.
Thanks,
Tom
|
|
|
|
|
Joined: Feb 2002
Posts: 925
Traveler
|
|
Traveler
Joined: Feb 2002
Posts: 925 |
tmsxmsails said:
Thanks for the replies. I'm a little surprised that there are so many warnings about getting the mooring lines wrapped in the prop.
Obviously, I haven't done this before and, in fact, I have virtually no experience backing a large monohull. I understand that the boat doesn't steer very well in reverse but it seems like, if I'm backing slowly towards the ball, I'd have very little chance of overrunning it and getting things in the prop. Even if I really overcook it and back into the ball too fast, I just take it out of gear and wait until I drift back off of it right?
The big risk that I was expecting was if I had the the bow line led back along say, the starboard side and I back up to the ball and tie onto it, but the boat turns such the ball is on the port side. Is there a chance I could get hung up and not be able to "unwind"? It seems like it would blow around but maybe it could get stuck?
I really want to try this but I want to get as many tips as possible before I do.
Thanks,
Tom A little clarification. I never said “Back into a mooring with a mono”. That would be dumb. What sail2 and I where referring to is the practice of slowly pulling abeam of the mooring and grabbing it. DO NOT TRY TO BACK INTO IT
|
|
|
|
|
Joined: Dec 2005
Posts: 10,213
Traveler
|
|
Traveler
Joined: Dec 2005
Posts: 10,213 |
The prop does not need to be turning to do damage. As you know, when you backing up and reach the ball, the boat is not going to completely stop. A taught mooring ball line could snap, bend, or even worse, disengage the prop. I have never thought of even attempting to pick a ball from the stern in a mono.
|
|
|
|
|
Joined: Dec 2013
Posts: 329
Traveler
|
|
OP
Traveler
Joined: Dec 2013
Posts: 329 |
Okay, well, the question was about backing up to it but regardless; Why is there more risk of damaging the prop on a mono than on a cat?
|
|
|
|
|
Joined: Sep 2010
Posts: 5,720
Traveler
|
|
Traveler
Joined: Sep 2010
Posts: 5,720 |
Because a mono doesn't maneuver as easily. IF you get the line caught in the prop, damage done could be the same regardless of the boat, its just easier on a cat to keep it where you want.
The other issue can be getting it caught around the keel. Wind plays a factor as well.
Best bet is to pick it up from the bow - only reason we've ever picked up from the stern (as close to port or starboard side as possible) was due to us not having a usable boat hook.
Matt
|
|
|
|
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
I cleat a 15' dock line on the bow and motor up to the mooring until I'm almost at a stop, pop it in neutral and run up with the boat hook grab the pennant and slide the dock line through the eye of the pennant.
Works perfect 99% of the time even in high winds.
|
|
|
|
|
Joined: May 2004
Posts: 228
Traveler
|
|
Traveler
Joined: May 2004
Posts: 228 |
sail2wind said:
several years ago I saw Mike Kneafsey pick up a ball single handed mid ship, starboard side, nice pick up. Kneafsey also always had a Wichard snap shacke rigged, which makes singlehanding easy. Once you have the pickup done you can rig a safety line to the top of the ball at your leisure.
|
|
|
|
|
Joined: Dec 2005
Posts: 10,213
Traveler
|
|
Traveler
Joined: Dec 2005
Posts: 10,213 |
I have the same shackle, still not easy.
|
|
|
|
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
Tortola7 said:sail2wind said:
several years ago I saw Mike Kneafsey pick up a ball single handed mid ship, starboard side, nice pick up. Kneafsey also always had a Wichard snap shacke rigged, which makes singlehanding easy. Once you have the pickup done you can rig a safety line to the top of the ball at your leisure. Question, it seems if your single handling and your connected to a mooring ring with the Carbine hook and the trades are blowing, how can you disconnect it without forward motion to slacken the line?
|
|
|
|
|
Joined: Dec 2005
Posts: 10,213
Traveler
|
|
Traveler
Joined: Dec 2005
Posts: 10,213 |
|
|
|
|
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
sail2wind said:
with much difficulty So basically your better off running a line through the eye of the mooring so it can be released when you untie it from the cleat which makes the carbine only effective when you have someone at the helm.
|
|
|
|
|
Joined: May 2004
Posts: 228
Traveler
|
|
Traveler
Joined: May 2004
Posts: 228 |
The safely is just a slack line slipped through the top of the ball, it isn't under tension and can be released easy. To release the Wichard under load, just throttle up a bit to take the slack off, walk up and release it, it isn't hard at all.
|
|
|
#24174
12/24/2013 06:18 AM
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
If it's blowing 15 or 20k the boat will be blown back by the time you get to the bow and then you still have to physically unclip it.
It just seems it would be better with a crew.
|
|
|
|
|
Joined: May 2004
Posts: 228
Traveler
|
|
Traveler
Joined: May 2004
Posts: 228 |
Everything is better with a crew, but when singlehanding, that isn't an option. The boat won't be blown back that fast, just over run the ball just a bit. Basically you have the painter plus the bridle, so you can move the boat up about 6+ meters. Gives you plenty of time.
|
|
|
|
|
Joined: Dec 2013
Posts: 329
Traveler
|
|
OP
Traveler
Joined: Dec 2013
Posts: 329 |
sail445 said:
I cleat a 15' dock line on the bow and motor up to the mooring until I'm almost at a stop, pop it in neutral and run up with the boat hook grab the pennant and slide the dock line through the eye of the pennant.
Works perfect 99% of the time even in high winds. Regarding this technique; so in the end, you have your line cleated on one end, passed through the eye of the mooring line, and then cleated on the same or another cleat? I was told not to do that as it can create a sawing motion and abrade the mooring loop (both I'm sure but they were worried more about the mooring loop). This would make for easy drops since you just uncleat one end and drop the loop. Is the sawing risk only if you run from one cleat to another side (making a V/bridle)? Is it better to run back to the same cleat so that you have more of a straight run on your line? Thanks, Tom
|
|
|
|
|
Joined: Dec 2007
Posts: 348
Traveler
|
|
Traveler
Joined: Dec 2007
Posts: 348 |
This is my favorite way to pick up mooring pennant. This technique starts @ about 1:15 DO NOT TRY THIS @ HOME! My daughter is wearing the yellow headband.... <img src="http://www.traveltalkonline.com/forums/images/graemlins/Grin.gif" alt="" />
I always take life with a grain of salt. Plus a slice of lemon, and a shot of tequila
|
|
|
#24178
12/25/2013 08:17 AM
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
Well I'm going to stick with my system, it's fail safe.
|
|
|
#24179
12/25/2013 08:25 AM
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
Yes the best way is to run it back to the same cleat.
If you run it to the other cleat you have a chance of it touching the bow
Anchor.
I can't think of a way to hook up to a mooring pennant quickly and with less chafe the the one I just mentioned.
In the USVI the NPS recommends the same system of running your line through and back to the same cleat.
|
|
|
#24180
12/25/2013 08:41 AM
|
Joined: Jul 2008
Posts: 3,003
Traveler
|
|
Traveler
Joined: Jul 2008
Posts: 3,003 |
Great crew member it's no wonder your winning <img src="http://www.traveltalkonline.com/forums/images/graemlins/Cheers.gif" alt="" /> <img src="http://www.traveltalkonline.com/forums/images/graemlins/usflag.gif" alt="" />
|
|
|
|
|
Joined: Jun 2004
Posts: 6,100
Traveler
|
|
Traveler
Joined: Jun 2004
Posts: 6,100 |
Back to the OP question... We've moored by the stern a couple of times in a cat. To do this we first moored by the stbd bow up close, and then using dock lines and some engine work transferred the load from the bow to the midships cleat, and then to the stern on one side, and then we hooked up the other side... ending up with one loop to port and one to starboard. This definitely takes some thinking through the operation in advance.
When moored by the stern the breeze and shade is heavenly in the afternoon, but you get your cockpit completely soaked if it rains. There's no place to hide.
|
|
|
|
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
tmsxmsails said:
Why is there more risk of damaging the prop on a mono than on a cat? Because most sail drive props are rubber hub, outboard style, props. When they are wrapped, the hub gets sun and the prop fails permanently soon thereafter. Most monohulls have props that are not rubber hubbed and are, this, less likely to suffer expen$ive damage.
|
|
|
#24183
12/27/2013 04:43 PM
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
Anonymous said:tmsxmsails said:
Why is there more risk of damaging the prop on a mono than on a cat? Because most sail drive props are rubber hub, outboard style, props. When they are wrapped, the hub gets sun and the prop fails permanently soon thereafter. Most monohulls have props that are not rubber hubbed and are, this, less likely to suffer expen$ive damage. Make that "spun".
|
|
|
#24184
12/27/2013 06:38 PM
|
Joined: Feb 2002
Posts: 925
Traveler
|
|
Traveler
Joined: Feb 2002
Posts: 925 |
Anonymous said:tmsxmsails said:
Why is there more risk of damaging the prop on a mono than on a cat? Because most sail drive props are rubber hub, outboard style, props. When they are wrapped, the hub gets sun and the prop fails permanently soon thereafter. Most monohulls have props that are not rubber hubbed and are, this, less likely to suffer expen$ive damage. That’s I tidbit of worthless information from our anonymous friend. Let’s see, with a line fouled in the prop we may have damaged the hub on a saildrive propeller and you have a couple hundred pressing a new one in. OR On a straight inboard found on most mono’s The same line bends the shaft that takes out the cutlass bearing, maybe bends the strut and may have bent the rudder post. A couple thousand at least. Geeez
|
|
|
|
|
Joined: Dec 2005
Posts: 10,213
Traveler
|
|
Traveler
Joined: Dec 2005
Posts: 10,213 |
Don't you just love these clueless anon posts?
|
|
|
|
|
Joined: Jan 2010
Posts: 1,336
Traveler
|
|
Traveler
Joined: Jan 2010
Posts: 1,336 |
Evan, the guy in Capt Rick's video at Anegada had several mooring balls near the stern and thought it was just fine. <img src="http://www.traveltalkonline.com/forums/images/graemlins/Grin.gif" alt="" />
|
|
|
|
|
Joined: Feb 2002
Posts: 925
Traveler
|
|
Traveler
Joined: Feb 2002
Posts: 925 |
Richieg1g said:Evan, the guy in Capt Rick's video at Anegada had several mooring balls near the stern and thought it was just fine. <img src="http://www.traveltalkonline.com/forums/images/graemlins/Grin.gif" alt="" /> That's true. Hopefully he has since taken up Playing with rubber ducks in the tub <img src="http://www.traveltalkonline.com/forums/images/graemlins/Grin.gif" alt="" />
|
|
|
|
|
Joined: Oct 2013
Posts: 692
Traveler
|
|
Traveler
Joined: Oct 2013
Posts: 692 |
I have a better idea. I will go with you next trip and be your mooring girl picker upper! Leave the fancy tricks to the locals. <img src="http://www.traveltalkonline.com/forums/images/graemlins/Groovin.gif" alt="" />
Sue s/v Ripple Leopard 40 ![[Linked Image]](https://www.tickerfactory.com/ezt/d/4;10730;128/st/20241104/e/sailing+the+USVI+BVI/dt/-2/k/e2d4/event.png)
|
|
|
|
|
.
![[Linked Image]](www.sailbvi.net/images/gb_red_ensign.gif)
![[Linked Image]](http://tickers.tickerfactory.com/ezt/d/4;10730;128/st/20120627/e/BVI+Trip/dt/-3/k/e46d/event.png)
